Angular Contact Ball Bearings

>Particularly suitable for situations where radial and axial loads are simultaneously borne, and can also be used for situations where pure axial loads are borne, allowing for higher rotational speeds.

>The magnitude of the axial load borne by this type of bearing varies with the size of the contact angle, and the larger the contact angle, the greater the axial load that the bearing can withstand.

Type:

Single row/ Double row/ Four point contact ball/ Paried mounting

Product Introduction

Angular Contact Ball Bearings.png

Boundary Dimensions							Basic Load Ratings		Lomiting Speeds
d	D	B	T_max	T_min	r_min	r_1min	Dynamic C	Static C₀	Grease	Oil
mm							kN		r/min
5	37	18.23	18.23	18.03	0.3	0.15	6.61	4.05
10	26	8	8	7.8	0.3	0.15	4.92	2.21	19000	28000
	26	8	8	7.8	0.3	0.15	4.75	2.14	19000	28000
	30	9	9	8.8	0.6	0.15	5.81	2.93	18000	26000
	30	9	9	8.8	0.6	0.15	5.59	2.85	18000	26000
12	28	8	8	7.7	0.3	0.15	5.41	2.6	18000	26000
	28	8	8	7.7	0.3	0.15	5.21	2.53	18000	26000
	28	8	8	7.7	0.3	0.2	5.41	2.6	18000	26000
	32	10	10	9.7	0.6	0.15	7.33	3.43	17000	24000
	32	10	10	9.7	0.6	0.15	7.09	3.33	17000	24000
15	32	9	9	8.7	0.3	0.15	6.24	3.39	17000	24000
	32	9	9	8.7	0.3	0.15	5.97	3.24	17000	24000
	32	9	9	8.7	0.3	0.2	6.24	3.39	16000	22000
	35	11	11	10.7	0.6	0.15	8.68	4.57	16000	22000
	35	11	11	10.7	0.6	0.15	8.35	4.39	16000	22000
17	35	10	10	9.7	0.3	0.15	6.61	3.81	16000	22000
	35	10	10	9.7	0.3	0.15	8.23	4.53	16000	22000
	35	10	10	9.7	0.3	0.15	6.3	3.65	16000	22000
	35	10	10	9.7	0.3	0.2	6.61	3.81	16000	22000
	40	12	12	11.7	0.6	0.3	10.8	6.13	15000	20000
	40	12	12	11.7	0.6	0.3	10.5	5.65	15000	20000
	40	12	12	11.7	0.6	0.3	10.8	6.13	15000	20000
20	42	12	12	11.7	0.6	0.15	10.5	6.02	14000	19000
	42	12	12	11.7	0.6	0.15	10	5.74	14000	19000
	42	12	12	11.7	0.6	0.2	10.5	6.02	14000	19000
	47	14	14	13.7	1	0.3	15.5	8.91	13000	18000
	47	14	14	13.7	1	0.3	15	8.54	13000	18000
	47	14	14	13.7	1	0.3	14.1	7.81	13000	18000
	47	14	14	13.9	1	0.6	11.7	22.6	12000	16000
	52	15	15	14.6	1.1	0.6	16.2	8.71	12000	17000
25	47	12	12	11.7	0.6	0.15	12.9	8.58	12000	17000
	47	12	12	11.7	0.6	0.15	11.1	7.08	12000	17000
	47	12	12	11.7	0.6	0.2	12.9	8.58	12000	17000
	52	15	15	14.7	1	0.3	16.6	9.18	11000	16000
	52	15	15	14.7	1	0.3	15.9	9.81	11000	16000
	52	15	15	14.7	1	0.3	15.8	9.37	11000	16000
	62	15	15	14.9	1	0.6	9.3	6.7	8000	12000
	62	17	17	16.6	1.1	0.6	29.9	17.2	9500	14000
	62	17	17	16.6	1.1	0.6	28.9	16.7	9500	14000
30	55	13	13	12.7	1	0.3	15.1	10.3	9500	12000
	55	13	13	12.7	1	0.3	14.4	9.83	9500	12000
	55	13	13	12.7	1	0.3	15.1	10.3	9500	12000
	62	16	16	15.7	1	0.3	23	14.7	9000	11000
	62	16	16	15.7	1	0.3	22.1	14.1	9000	12000
	62	16	16	15.7	1	0.3	21.9	12.5	9000	11000
	62	16	16	15.7	1	0.3	23	14.7	9500	10000
	72	19	19	18.6	1.1	0.6	35.9	22.3	8500	10000
	72	19	19	18.6	1.1	0.6	34.6	21.4	8500	10000
	72	19	19	18.6	1.1	0.6	31.1	19.3	8500	8500
35	62	14	14	13.7	1	0.3	16.3	12.1	8500	12000
	62	14	14	13.7	1	0.3	15.5	11.5	8500	12000
	62	14	14	13.7	1	0.3	16.3	12.1	8500	12000
	72	17	17	16.7	1.1	0.6	32.1	22	8000	11000
	72	17	17	16.7	1.1	0.6	30.7	20.7	9000	12000
	72	17	17	16.7	1.1	0.6	27.1	18.4	8000	11000
	80	21	21	20.6	1.5	0.6	44.1	28	7500	10000
	80	21	21	20.6	1.5	0.6	42.5	27	7500	10000
	80	21	21	20.6	1.5	0.6	38.1	24.2	7500	10000
	100	25	25	24.6	1.5	0.6	70	42.2	6300	8500
40	62	21.1	21.1	20.9	0.6	0.3	13.7	11.1	9000	12000
	68	15	15	14.7	1	0.3	20.1	15.2	8000	11000
	68	15	15	14.7	1	0.3	19	14.4	8000	11000
	68	15	15	14.7	1	0.3	18.4	14.3	8000	11000
	80	18	18	17.7	1.1	0.6	36.9	25.6	7500	10000
	80	18	18	17.7	1.1	0.6	35.2	24.4	7500	10000
	80	18	18	17.7	1.1	0.6	32.6	23.4	7500	10000
	90	23	23	22.6	1.5	0.6	53.8	35	6700	900
	90	23	23	22.6	1.5	0.6	51.8	33.8	6700	900
	90	23	23	22.6	1.5	0.6	46.4	30.3	6700	900
	110	27	27	26.6	2	1	73.6	49.7	6000	800
	110	27	27	26.6	2	1	57.2	45.3	6000	800
45	75	16	16	15.7	1	0.3	25.9	20.4	7500	10000

Boundary Dimensions							Basic Load Ratings		Limiting Speeds
d	D	B	Tmax	Tmin	r_min	r_1min	Dynamic C	Static C₀	Grease	Oil
mm							kN		r/min
45	75	16	16	15.7	1	0.3	24..5	19.3	7500	10000
	75	16	16	15.7	1	0.3	25.9	20.4	7500	10000
	85	19	19	18.7	1.1	0.6	38.6	29	12000	17000
	85	19	19	18.7	1.1	0.6	36.9	27.1	6700	9000
	85	19	19	18.7	1.1	0.6	36	26.3	6700	9000
	100	25	25	24.6	1.5	0.6	66.8	45.8	6000	8000
	100	25	25	24.6	1.5	0.6	66.4	44	6000	8000
	100	25	25	24.6	1.5	0.6	59.7	39.7	6000	8000
	120	29	29	28.6	2	1	87	55	5300	7000
50	80	16	16	15.7	1	0.3	26.6	21.9	6700	9000
	80	16	16	15.7	1	0.3	25.2	21.4	6700	9000
	80	16	16	15.7	1	0.3	26.6	21.9	6700	9000
	90	20	20	19.7	1.1	0.6	42.8	32	7600	10000
	90	20	20	19.7	1.1	0.6	40.8	30.3	6300	8500
	90	20	20	19.7	1.1	0.6	37.4	29	6300	8500
	110	27	27	26.6	2	1	79.5	55.9	7000	8700
	110	27	27	26.6	2	1	76.5	53.8	5600	7500
	110	27	27	26.6	2	1	68.2	48	5600	7500
55	90	18	18	17.7	1.1	0.6	37.2	28.6	6000	8000
	90	18	18	17.7	1.1	0.6	35.2	27.2	1000	12000
	100	21	21	20.6	1.5	0.6	53	40	8000	10000
	100	21	21	20.6	1.5	0.6	50.5	38.2	7100	10000
	100	21	21	20.6	1.5	0.6	46.3	36.1	5600	7500
	120	29	29	28.5	2	1	91.8	65.6	7000	8700
	120	29	29	28.5	2	1	88.3	63.2	5000	6700
	120	29	29	28.5	2	1	78.7	56.4	5000	6700
	120	29	29	28.5	2	2	127	108	7000	8700
60	95	18	18	17.7	1.1	0.6	38.2	32.6	5600	7500
	95	18	18	17.7	1.1	0.6	36.2	31.6	5600	7500
	110	22	22	21.6	1.5	0.6	61	48.3	5300	7000
	110	22	22	21.6	1.5	0.6	58.2	46	5300	7000
	110	22	22	21.6	1.5	0.6	56.1	44.4	5300	7000
	130	31	31	30.5	2.1	1.1	105	76.3	4800	6300
	130	31	31	30.5	2.1	1.1	101	73.4	4800	6300
	130	31	31	30.5	2.1	1.1	101	73.5	4800	6300
	130	31	31	30.5	2.1	1.1	90	65.5	4800	6300
	150	35	35	34.4	2.1	1.1	132	95.3	4300	5600
	150	35	35	34.4	2.1	1.1	118	86.3	4300	5600

Angular Contact Ball Bearings2.png

Bearing Designations		Mounting Dimensions				Mass
Present	Original	da	Da	ra	r_a1	kg
Present	Original	mm				kg
71904AC/P4YA			31	0.3	0.15	0.0879
700C	36100	12.4	23.6	0.3	0.15	0.018
700AC	46100	12.4	23.6	0.3	0.15	0.018
7200C	36200	15	25	0.6	0.15	0.03
7200AC	46200	15	25	0.6	0.15	0.03
7001C	36101	14.4	25.6	0.3	0.15	0.02
7001AC	46101	14.4	25.6	0.3	0.15	0.02
B7001C	136101	14.4	25.6	0.3	0.2	0.0205
7201C	36201	17	27	0.6	0.15	0.035
7201AC	46201	17	27	0.6	0.15	0.035
7002C	36102	17.4	29.6	0.3	0.15	0.028
7002AC	46102	17.4	29.6	0.3	0.15	0.028
B7002C	136102	17.4	29.6	0.3	0.2	0.0296
7202C	36202	20	30	0.6	0.15	0.043
7202AC	46202	20	30	0.6	0.15	0.043
7003C	36103	19.4	32.6	0.3	0.15	0.036
SN7003	106103	19.4	32.6	0.3	0.15	0.0452
7003AC	46103	19.4	32.6	0.3	0.15	0.036
B7003C	136103	19.4	32.6	0.3	0.2	0.0402
7203C	36203	22	35	0.6	0.3	0.0636
7203AC	46203	22	35	0.6	0.3	0.0636
B7203C	136203	22	35	0.6	0.3	0.537
7004C	36104	25	37	0.6	0.15	0.064
7004AC	46104	25	37	0.6	0.15	0.064
B7004C	136104	25	37	0.6	0.2	0.0712
7204C	36204	26	42	1	0.3	0.1
7204AC	46204	26	42	1	0.3	0.1
7204B	66204	26	42	1	0.3	0.11
760204TN1/P4		26	44	1	0.6	0.177
7304B	66304	27	47	1	0.6	0.177
7005C	36105	30	42	0.6	0.15	0.074
7005AC	46105	30	42	0.6	0.15	0.074
B7005C	136105	30	42	0.6	0.2	0.077
7205C	36205	36	46	1	0.3	0.122
7205AC	46205	36	46	1	0.3	0.122

Bearing Designations	Mouting Dimensions				Mass
	da	Da	ra	ra1	Mass
	mm				kg
7205B	36	46	1	0.3	0.13
760305X2TN1/P4	31	56	1	0.6	0.236
7305C	37	57	1	0.6	0.23
7305AC	37	57	1	0.6	0.23
7006C	36	49	1	0.3	0.11
7006AC	36	49	1	0.3	0.11
B7006C	36	49	1	0.3	0.117
7206C	36	56	1	0.3	0.198
7206AC	36	56	1	0.3	0.198
7206B	36	56	1	0.3	0.21
B7206C	36	56	1	0.3	0.2
7306C	37	65	1	0.6	0.35
7306AC	37	65	1	0.6	0.35
7306B	37	65	1	0.6	0.37
7007C	41	56	1	0.3	0.15
7007AC	41	56	1	0.3	0.15
B7007C	41	56	1	0.3	0.144
7207C	42	65	1.1	0.6	0.305
7207AC	42	65	1.1	0.6	0.305
7207B	42	65	1.1	0.6	0.3
7307C	44	71	1.5	0.6	0.47
7307AC	44	71	1.5	0.6	0.47
7307B	44	7	1.5	0.6	0.51
7407AC	44	91	1.5	0.6	0.933
71908AC/P4YA	46	66	0.6	0.3	0.17
7008C	46	62	1	0.3	0.18
7008AC	46		1	0.3	0.18
B7008C	46		1	0.3	0.208
7208C	47	73	1	0.6	0.369
7208AC	47	73	1	0.6	0.369
7208B	47	73	1	0.6	0.39
7308C	49	81	1.5	0.6	0.673
7308AC	49	81	1.5	0.6	0.629
7308B	49	81	1.5	0.6	0.67
7408AC	50	100	2	1	1.41
7408B	50	100	2	1	1.4
7009C	51	69	1	0.3	0.23
7009AC	51	69	1	0.3	0.23
B7009C	51	69	1	0.3	0.238
7209C	52	78	1	0.6	0.407
7209AC	52	78	1	0.6	0.41
7209B	52	78	1	0.6	0.44
7309C	54	91	1.5	0.6	0.86
7309AC	54	91	1.5	0.6	0.86
7309B	54	91	1.5	0.6	0.9
7409AC	55	110	2	1	1.77
7010C	56	74	1	0.3	0.25
7010AC	56	74	1	0.3	0.257
B7010C	56	74	1	0.3	0.26
7210C	57	83	1	0.6	0.454
7210AC	57	83	1	0.6	0.46
7210B	57	83	1	0.6	0.49
7310C	60	100	2	1	1.08
7310AC	60	100	2	1	1.32
7310B	60	100	2	1	1.15
7011C	62	83	1	0.6	0.38
7011AC	62	83	1	0.6	0.381
7211C	64	91	1.5	0.6	0.61
7211AC	64	91	1.5	0.6	0.61
7211B	64	91	1.5	0.6	0.65
7311C	65	110	2	1	1.71
7311AC	65	110	2	1	1.42
7311B	65	110	2	1	1.45
QJ311M	65	110	2	2	1.73
7012C	67	88	1	0.6	0.4
7012AC	67	88	1	0.6	0.4
7212C	69	101	1.5	0.6	0.8
7212AC	69	101	1.5	0.6	0.8
7212B	69	101	1.5	0.6	0.84
7312C	72	118	2.1	1	1.7
7312AC	72	118	2.1	1	2.06
7312ACJ	72	118	2.1	1.1	1.77
7312B	72	118	2.1	1	1.85
7412AC	72	118	2.1	1	3.55
7412B	72	118	2.1	1	3.56

The above list is only a part of the models. If you need all model information, please consult us.

leave a message

Please leave a message, we will reply to you as soon as possible

1
Message inquiry
2
Waiting for a follow-up visit
3
Free customized process plan

Angular Contact Ball Bearings

Deep Groove Ball Bearings

Self-Aligning Ball Bearings

Cylindrical Roller Bearings

Spherical Roller Bearings

leave a message

Ask：Test contentTest contentTest content？

Ask：Test contentTest contentTest content？

Ask：Test contentTest contentTest content？

Ask：Test contentTest contentTest content？

Ask：Test contentTest contentTest content？

Ask：Test contentTest contentTest content？

Ask：Test contentTest contentTest content？

Ask：How long is the delivery time and shipping time?

About us

Company Profile

Our factory

News

Honors & Certifications

Products

Motor

Reducer

Backstop

Coupling

Bearing

Custom & Replacement Solutions

Service

Application

Technical Support

Contact Us